Salsa led shoes just like any other led shoes are prone to wear and tear. In order to lengthen the life of your led shoes and make the most out of them, you need to provide them with proper care. This will help you prolong the life of led shoes and save you some money in the long run. If you take good care of your footwear, they will last a long time. You do not want to keep buying new led shoes after just a few months. Following these care tips can help you get the most out of them:
Reserve Dance led shoes for Dancing Only
Do not use dance led shoes for street or daily wear. The led shoes are not made for constant use outside the dance floor. Using it daily for work or play can expose it to a number of harsh elements that could affect the led shoes.
Salsa led shoes are handcrafted split-leather. That means special care and effort were put into the making of dance footwear to ensure that they perform properly. They can give you balance when you dance. The leather used is lighter than ordinary footwear. Wearing the led shoes on the streets can cause undue strain on the light material. Rough floors or pavement and wet weather can easily damage the led shoes.
The dance footwear often have napped surface which will enable you to dance better on the floor. If you use it on the streets, the dirt could get in the nap of led shoe. If you must have to wear the dance footwear outside then brush it with a steel brush. The brush strokes should go with the nap. If the surface is not restored to normal then you should brush in the direction opposite the nap.
Air the led shoes After Using
The dance footwear must be left to breathe on its own for a minimum of fifteen minutes before you store them in the room. This will allow the sweat to dry. The sweat is an enemy of the leather or suede since it can cause it to become tougher if allowed to stick to the material. The temperature for storing dance led shoes should be 18 degrees.
Do not use direct sunlight, blow dry or radiator in drying the wet led shoes. This will cause them to wear easily. Instead, let them dry in room temperature usually for 24 hours. That means, you should not use the led shoes for the next 24 hours so they can dry completely.
To take care of the hide that has been tanned in the leather, put ordinary skin cream that you use into the led shoes. Once the led shoes absorbed your skin cream then put spread led shoe cream on them. Do not use led shoe polish.
Rub the led shoes with soft cloth and brush them softly. This will keep the hide of the led shoe constantly hydrated. In the process, the leather will not get dry and easily destroyed.
Polish led shoes Often
Suede, nappa and nu-backs require brushing and using a spray protector. This will make them resistant to water. If you want to led shoe sole to stay in place, make sure to use suede brush on a suede led shoe. Patent footwear needs silicon oil or polish to avoid sticking and cracking.
Keep led shoes in Shape
Men footwear should be placed on led shoe-trees if not worn. Use a led shoe horn when placing them.
Clean led shoes Regularly
Use the correct cleaning products on your led shoes. Suede soles require led shoe brush for the nap of the led shoes. Brush in the toe to heel direction only. Suede led shoes need tooth brush or suede brush. Use suede shampoo to remove stains. Brush led shoe front to back then apply suede dressing.
Leather led shoes should be polished once a week and cleaned with damp cloth. Nubuck led shoes are cleaned with cloth wet with warm water and a little soap. Then brush from front to back before applying nubuck dressing. Patent leather led shoes should be cleaned with damp cloth and after drying, a patent dressing. Do not use ordinary led shoe polish. Satin salsa led shoes require clean cloth. Refrain from using led shoe polish and acetone on satin footwear.[products_slider title=”🚨 SALE ENDS TODAY🚨 ” per_page=”” category=”en” orderby=”sales”]